Home > Products > Filter material/Filter media > Sand filter media

    Garnet for Abrasive Blasting

    Garner For   Blast   Cleaning(surface    preparation)before   painting,garnet   is    ideal   abrasive because  of  its  high  hardness  and  gravity,free  silica  and  u
    +86 17737144966
    Share us:

    Garner For   Blast   Cleaning(surface    preparation)before   painting,garnet   is    ideal   abrasive because  of  its  high  hardness  and  gravity,free  silica  and  uniformity  of  particle  size, with  superior  performance  during  blasting.And  it  can  be  recycled.

    Different particle sizes is used to clean the surfaces with different roughness.

    Now it is widely used in large-scale petroleum and chemical industries,shipyard and ship  repair  industry,paint  spray  and  anti-corrosion  treatment  industry,cloth  sand washing … …

    Being  crushed  from  hard  rock,after  5  times  wash|and  magnetic  seperation,our garnet  is  with  low  chloride  content  (25ppm  max.),/cleaner,sharper  and  wide  size range is available.



    Garnet Sand Physical Characteristic

     


    Specific  Density :         3.8-4.1  g/cm³ 

    Bulk Density:                1.9-2.1 g/cm³ 

    Mohs Hardness :          7.5-8.0

    Chloride:                      <25ppm 

    Acid  solubility(HCL)    <1.0%

    Conductivity                 <50μs/cm

    Melting  point  :            1300℃

    Grain shape:                 sub angular


    Garnet for Abrasive  Blasting(图1)


    Industry    Application:

    Oil&Gas    industry     maintenance,&new    constuction.

    Shipbuilding,Ship    Repair    Yards,Bridge     building,Rail

    Tanker  maintenance,etc.

    Denim  Washing.



    Send Your Inquiry
    We not only provide a good product, but also provide high quality service. If you are interested in our products,
    you can contact us in the following ways.
    Email:
    Tel/WhatsApp:
    Inquiry: